Sunday

• I removed the windshield and sanded the front windshield frame and the driver's side doors to remove the old primer and prep the surface below.
• First I removed all the hardware then I sanded the metal surface with 60 grit follow by 120 grit. 
• By the way this is no easy job.  Nothing technically exciting about this job just tedious grunt work.  I hand sanded the area around the windows because the 4" electric sander wasn't all that affective with the curves and groves of the door windows.
• Once completed the surface was brush painted with a good Rust Stop primer.

Monday

• Had so much fun on Sunday that I spent all day Monday working on the passenger side.
• This is tedious time consuming work but after running my hand on the finished surface I knew this work will have a big affect on the final top coat.